Can You Paint a Vinyl Fence?

You can paint a vinyl fence, but in most cases you should not. Paint can void the manufacturer's warranty, and the wrong color can warp the vinyl. CertainTeed's lifetime limited warranty for its Bufftech fence line says the warranty does not apply to, and is voided for, fence product "that has been painted, varnished or coated over the manufacturer's original finish."
The color risk comes from heat, and paint makers have put a number on it. Benjamin Moore's technical data sheet for its vinyl siding paint says not to paint vinyl with any color darker than the original, or with a Light Reflective Value below 55, unless the color comes from its vinyl-approved palette. Sherwin-Williams gives the reason: darker colors absorb more heat, "causing the plastic vinyl to warp, buckle and distort." Those instructions were written for vinyl siding, and a vinyl fence is the same family of material standing in the same sun. This post covers the warranty, the heat problem, how to paint if you decide to, and better ways to change a fence's color.

Does Painting a Vinyl Fence Void the Warranty?
It can, and you should assume it will until you have read your own warranty.
CertainTeed's Bufftech warranty is explicit. Painted, varnished or coated product is excluded.
Other warranties get there by a different route. VEKA's limited lifetime warranty for its outdoor living products covers its vinyl extrusions against chipping, peeling, blistering, rotting and corroding "when used in accordance with VEKA fabrication, installation, care and maintenance instructions and guidelines." Painting is not named there, but a coating applied over the factory surface is a hard thing to square with a warranty that depends on following the maker's care instructions.
Before you open a can:
Find your warranty document, or ask your installer which brand was used.
Read the exclusions for the words painted, coated, altered and care instructions.
If it is unclear, ask the manufacturer in writing.
Our post on what vinyl fence warranties typically cover explains the usual terms.
Why Is Dark Paint a Problem on Vinyl?
Vinyl softens with heat. Vinyl fencing is made from polyvinyl chloride, or PVC, a rigid plastic that holds its shape at normal outdoor temperatures and loses stiffness as it gets hot.
A Massachusetts state building advisory, citing the Vinyl Siding Institute, puts the threshold in numbers: temperatures beginning at 160 to 165 degrees Fahrenheit can soften normal grades of vinyl siding, and darker colors absorb more heat and will soften before lighter colors.
White and tan vinyl reflect most sunlight. Paint the same panel dark brown or black and it absorbs far more of that energy. Sherwin-Williams explains what happens next: dark paint absorbs the heat of the sun and transfers it to the vinyl, and when vinyl expands dramatically it is not able to contract to its original dimensions.
On a fence, that can show up as rails that bow, pickets that ripple and panels that no longer sit square in their posts. Vinyl that has distorted does not return to shape.
Reflected sunlight makes it worse. The same Massachusetts advisory notes that sunlight reflected from low-e windows has been measured at more than 200 degrees. A fence section that catches reflected light from nearby windows runs hotter than the rest of the fence.
Can You Paint a Vinyl Fence a Darker Color Safely?
Only with paint and colors made for vinyl, and even then you are relying on a product tested for siding.
The two rules from the paint manufacturers are consistent:
Stay the same shade or lighter. Sherwin-Williams advises painting vinyl in a shade no darker than the original color.
Or use a vinyl-safe color. Sherwin-Williams offers VinylSafe colors in its SuperPaint and Duration exterior lines, formulated to resist warping or buckling when applied to sound, stable vinyl siding. Benjamin Moore's rule allows colors below an LRV of 55 only from its vinyl palette.
Light Reflective Value is a scale that describes how much light a color reflects. Higher numbers are lighter and reflect more. Paint makers publish the LRV for each color.
Ask the paint store in writing whether the product is approved for PVC fencing and not only for siding. If the answer is siding only, you are experimenting on your own fence.
How Do You Paint a Vinyl Fence If You Decide To?
If the warranty has expired or you accept the risk, follow the paint maker's process.
Clean it thoroughly. Sherwin-Williams calls a clean surface particularly imperative on vinyl. Benjamin Moore requires any mildew, chalk and dirt to be removed for adhesion. Wash, rinse with a hose and let it dry completely.
Skip oil-based paint. Sherwin-Williams says oil-based coatings are not recommended on vinyl because of poor flexibility.
Prime only where needed. Benjamin Moore says a primer is not necessary in most cases and that only pitted and porous areas must be primed. Sherwin-Williams says priming is not required on vinyl in sound condition with its recommended acrylic latex.
Choose the color by the rules above. Same shade, lighter, or a vinyl-safe color.
Test first. Paint the back of one panel in full sun and watch it through a few hot days before doing the whole fence.
Understand what you are signing up for. Vinyl's main selling point is that it never needs paint. Once it is painted, it is a painted fence, and paint on any outdoor surface eventually needs to be redone.
Does Your Fence Need Paint or a Good Cleaning?
Most vinyl fences that look like they need paint need washing.
Gray film, green algae on the shaded side and a chalky residue are all surface problems. CertainTeed's care instructions say soil, grime and chalk can be removed with a garden hose and a bucket of soapy water. Freedom's vinyl fence care guide says most dirt washes off with a mild soap and water solution and recommends a non-abrasive liquid cleaner for minor stains.
Clean one section before deciding anything. A white fence that has gone dull often comes back to its original color in an afternoon. Our step-by-step guide to how to clean and maintain a vinyl fence covers the method and what to avoid.
If the surface is still yellowed, brittle or cracked after cleaning, paint will not fix it. That is age, and the question becomes repair or replacement. See how long a vinyl fence lasts in Pennsylvania.
What Are Better Ways to Change the Color of a Vinyl Fence?
If you want a different color, there are options that do not put the fence at risk.
Replace panels in a factory color. Vinyl fencing is manufactured in colors and wood-look finishes with the color built into the material by the manufacturer. A factory color does not put the warranty at risk the way a coat of paint can.
Change the accents. New post caps, a contrasting gate or a section of lattice changes the look of a fence without coating anything.
Use landscaping. Shrubs or climbing plants on a separate trellis in front of the fence soften a bright white run.
Choose a different material for the next fence. If you want black, ornamental aluminum is available in black from the factory.
Our post on the best fence colors for your home shows how color choices play against siding and trim.
FAQ
Will paint stick to a vinyl fence?
Acrylic latex paint made for vinyl will adhere to a clean, dry, sound surface. Adhesion is not the main risk. Heat distortion and the warranty are.
Can I paint a white vinyl fence black?
That is the highest-risk change you can make. Black absorbs the most heat. Paint makers say not to go darker than the original color unless the color is specifically formulated for vinyl.
Does painting vinyl fence void the warranty?
CertainTeed's Bufftech warranty is voided for painted product. Other brands vary, so read your own warranty before painting.
What kind of paint is used on vinyl?
Sherwin-Williams recommends an exterior acrylic latex for vinyl and advises against oil-based coatings.
Can I spray paint a vinyl fence?
The same color and product rules apply whether the paint is brushed, rolled or sprayed. Check that the specific product is approved for vinyl.
How do I make an old vinyl fence look new without paint?
Wash it with a mild soap and water solution, rinse it, and replace any cracked or broken pieces.
Vinyl Fencing in the Color You Want From the Start
Just Fences is a locally owned fence company in Harrison City, established in 2007, that installs vinyl, aluminum, wood, chain link and custom fences across Westmoreland County and Greater Pittsburgh. Free quotes are available, and installations carry a 2-year workmanship warranty. If your fence is past cleaning, see current styles on the vinyl fences page.
Visit Just Fences or call (724) 392-4416 today. Contact us for more information.





Comments